UK & International Delivery

Oak Coat Hooks – Oiled Oak Universal Wall Hook

(3 customer reviews)

From: £4.50


Price per hook. Quantity discounts up to 10% are automatically applied at the checkout.

 

Clear

Estimated Dispatch Time: 3-5 working days

 

Product Description

Minimal, clean and beautifully simple. You can use our easy-to-fit universal oak coat hooks in many ways around the home or office interior. Position them individually on the wall to suit an elegant coat, scarf or in a configuration to create an oak coat rack. You can use our oak wall hooks for hanging mirrors, artwork, fabrics, and other items to stunning effect. Many customers use them for as an attractive oak wall hook for hanging plants.

You can put up a single hook to hang your favourite hat, umbrella, dog lead or keys. Install two or more rows to create a unique shoe or tie rack. Flexible, versatile, and a great way to maximise space.

Cut from solid American oak. You can buy our oak coat hooks in every finish to match our product range. Measuring 125mm long by 30mm square, our oiled oak hooks come ready to be screwed into position.

Affix to the wall with a single fixing which comes provided. Our unique fixing method enables fitting of our oak hooks to plasterboard, solid and dot and dab walls. Fitting method for our oak coat pegs can be found below.

For delivery information please see our delivery page.


How to Fit our Oak Coat Hooks

Solid Wall – Our solid wall oak coat hooks are supported on a single screw thread with a wall plug. Simply drill a 10mm hole in the desired position. Insert the provided wall plug and screw the wall hook in until it is hand tight.

Dot and Dab Wall – Fitted in the same way as the solid wall fixings, these have a longer thread section for reaching into the solid wall behind. For additional strength we recommend supporting the wall at the fixing point using a chemical resin.

Plasterboard Wall – Our plasterboard wall oak coat hooks are supported on a Gripit brown fixing. Simply drill a 20mm hole in the desired position. Insert the Gripit fixing with the directional arrow pointing upwards. Use a screwdriver to expand tabs and screw the wall hook in until it is hand tight. Please note the load bearing of the oak wall hook will be reduced when fitted to plasterboard.


Tools You Might Need

10mm Masonry Drill Bit

20mm Flat Drill Bit

Specification

3 reviews for Oak Coat Hooks – Oiled Oak Universal Wall Hook

  1. Brown, Jack

    Really helpful correspondence, and the hooks are perfect. Thanks!

  2. JB

    Perfectly made and delivered in good time.

  3. RH

    Unfortunately 2 of the 6 hooks we bought had bent screws – so the hook did not stand out straight from the wall when installed, but at a quite an obvious angle. On contacting the company about the issue we were told by Bespoak that we needed to bend the hooks into position ourselves, once they were in the wall to correct the fault… sadly not ideal considering the price and courier delivery cost.

    • admin

      The angle of the screw can vary slightly on the hooks. As we said via email, this isn’t something we correct to a fine degree when sending them out (closer than a couple of degrees from square). As it is very rare that holes in masonry are drilled to a higher degree of accuracy than this, the slight correction of the hook is often needed anyway upon installation. Consisting of a light bend before making the final turn of the hook flush with the wall. This only needs to be done if required based on the hole drilled and/or thread angle.

Add a review

Your email address will not be published. Required fields are marked *