Sold individually, our multi-wall concealed floating shelf brackets offer the most versatile invisible shelf bracket method currently available for fixing floating shelves. Of our own design the completely concealed shelf bracket has an interchangeable thread section meaning it can be adapted to a wide range of wall surfaces. We supply this shelf fixing in two different barrel length options. Measuring 80mm or 120mm, this invisible shelf fixing is suitable for supporting most conventional shelf sizes. These fixings are the type that we use in our solid oak floating shelves up to 250mm depths. For heavier duty applications please see our Heavy Duty Floating Shelf Brackets.
We produce these floating shelf brackets with a specific diameter that ensures a snug fit in a 12.5mm mounting hole. This eliminates the need for a locking screw or knurling on the fixing to hold your shelf in place. We recommend using a 12.5mm HSS drill bit for drilling the shelf. We offset the screw thread to the barrel to give you fine levelling adjustment of the shelf during fitting.
All our shelf fixings are of our own design and they are made solely for BespOak Interiors. Consequently they are only available to buy direct. Please contact us for information on bulk pricing options for any of the fixings in our range.
The solid wall floating shelf bracket has a 65mm thread section and comes provided with a high quality Fischer UX10 wall plug and landing washer. You will require a 10mm Masonry Drill Bit for installing this fixing. This has a weight rating of 10kgs. The recommended fixing on a 200mm depth shelf is 2 per metre.
Dot and Dab Wall
The dot and dab wall invisible shelf bracket has a 100mm thread section for an increased reach into the solid portion of dot and dab walls. This bracket comes provided with a high quality Fischer UX10 wall plug and landing washer. You will require a 10mm Masonry Drill Bit for installing this fixing. This has a weight rating of 10kgs. The recommended fixing on a 200mm depth shelf is 2 per metre. We also recommend that the wall is strengthened at the fixing point using Fischer Chemical Resin.
The plasterboard wall shelf bracket comes with a machine thread section for fixing into a Gripit Brown Fixing. The Gripit fixing is provided and you will require a 20mm Flat Drill Bit for installation. Due to the restrictions of fixing to plasterboard only we recommend a maximum shelf depth of 150mm with 4 fixings per metre.
If you are unsure of which invisible shelf bracket might be best for your application, then don’t hesitate to contact us and we should be able to advise you.
Please head to the “Video” tab above for our handy visual guide on using these brackets to fit a floating shelf.